Chenbro PS-MRM6650PH-7 650W Redundant Power Supply

• Mfr Part Number: PS-MRM6650PH-7
• Feature:
• Remarks: 85% Is Normal Condition and 95% Is With Special Coating Process
• Remote On / Off Control
• Faulty Alarm Methods: LED, Buzzer, TTL Signal
• Hot-swappable / Hot-pluggable Redundancy Function
• Balance Load Sharing Design
• Remote Sensing Design
• Isolation: Built-in In The Power Module
• Meet Iec-1000-3-2 Class D (Active PFC)
• Emi Noise Filter: Fcc Class B, Cispr22 Class B
• Safety: Meet Ul 1950, Csa 22.2 No/ 950, Tv Iec 950
• AC Input:
• Voltage: 100~264 VAC Full Range
• Frequency: 47~63 Hz
• Input Current: 11/5.5A For 115/230 VAC
• Inrush Current: 110A/150A Max, For 115/230 VAC Per Power Module
• Total Output: 650 W
• Hold Up Time: 16ms Minimum at Full Load & 90 VAC Input Voltage
• Dielectric Withstand: Input / Output 1500 Vac For 1 Minute
• Input To Frame Ground 1500 VAC For 1 Minute
• Efficiency: 68% Typical, at Full Load
• Power Good Signal: On Delay 100ms To 500ms, Off Delay 1ms
• Over Load Protection: 110 ~ 150% Max.
• Over Voltage Protection: +5V- > 5.7V~6.5V, 3.3V- > 3.9V~4.5V, 12V- >13.3V~14.5V
• Over Current Protection: 5V, 12V, 3.3V 130% +/- 20% At Full Load -5V, -12V Short Circuit
• Dimension: 10 x 5.91 x 3.31 inch / 254 x 150 x 84 mm