Chenbro Zippy PS-M1Z3-6760P-H 760W 3U 2+1 Redundant Power Supply

• Mfr Part Number: PS-M1Z3-6760P-H
• Features:
• REMARKS: 85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
• HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
• DIELECTRIC WITHSTAND: INPUT / OUTPUT 3000 VAC FOR 1 SECOND, INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
• EFFICIENCY: 65% TYPICAL AT 115VAC FULL LOAD
• POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
• OVER LOAD PROTECTION: 110% ~ 180%
• OVER VOLTAGE PROTECTION: +5V@5.7V ~ 6.5V, 3.3V@3.9V ~ 4.7V, +12V@13.3V ~ 14.3V, OVER CURRENT PROTECTION: 110% ~ 180%
• EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
• SAFETY: UL 1950, CSA 22.2 NO/ 950, TUV IEC 950
• REMOTE ON / OFF CONTROL
• THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE
• 3.3V REMOTE SENSING
• Input:
• Input voltage: 90 ~ 264 VAC
• Input frequency: 47 ~ 63 Hz
• Input current: 10A MAX AT ANY LOW/HIGH INPUT VOLTAGE
• Inrush Current: 60/100A @ 115/230VAC (25°C)
• POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD
• Output: 5V@48A, 12V@50A, -12V@1.5A, -5V@1A, 3.3V@45A, +5VSB@3.5A
• THE OUTPUT POWER OF 5V AND 3.3V MAX:40A
• EACH POWER MODULE OUTPUT MAX: 420W
• Total Output Power Max: 760W
• Dimensions: 10.43 x 3.98 x 4.92 inch / 265 x 101 x 125 mm