Cisco PAP2T-NA Analog Telephone Adapter

• Mfr Part Number: PAP2T-NA
• Features
• Two voice ports (RJ-11) for analog phones or Fax machines
• Impedance Agnostics - 8 Configurable Settings
• Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
• Caller ID with Name/Number (Multi-national Variants)
• Caller ID Blocking
• Call Forwarding: No answer, Busy, All
• Do Not Disturb
• Call Transfer
• Three-way Conference Calling with Local Mixing
• Message Waiting Indication - Visual and Tone Based
• Call Return
• Call Back on Busy
• Call Blocking with Toll Restriction
• Delayed Disconnect
• Distinctive Ringing - Calling and Called Number
• Off-hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold
• Data Networking
• MAC Address (IEEE 802.3)
• IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
• ARP - Address Resolution Protocol
• DNS - A Record (RFC 1706), SRV Record (RFC 2782)
• DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
• ICMP - Internet Control Message Protocol (RFC792)
• TCP - Transmission Control Protocol (RFC793)
• UDP - User Datagram Protocol (RFC768)
• RTP - Real Time Protocol (RFC 1889) (RFC 1890)
• RTCP - Real Time Control Protocol (RFC 1889)
• DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
• SNTP - Simple Network Time Protocol (RFC 2030)
• Voice Gateway
• SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
• SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
• Re-registration with Primary SIP Proxy Server
• SIP Support in Network Address Translation Networks - NAT (incl. STUN)
• Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
• Codec Name Assignment
• Fax Capability
• Fax Tone Detection Pass-Through
• Fax Pass-Though - Using G.711
• DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
• Flexible Dial Plan Support with Interdigit Timers and IP Dialing
• Call Progress Tone Generation
• Jitter Buffer - Adaptive
• Frame Loss Concealment
• Full Duplex Audio
• Echo Cancellation (G.165/G.168)
• VAD - Voice Activity Detection with Silence Suppression
• Attenuation / Gain Adjustments
• Flash Hook Timer
• MWI - Message Waiting Indicator Tones
• VMWI - via FSK
• Polarity Control
• Hook Flash Event Signaling
• Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
• Music on Hold Client
• Streaming Audio Server - up to 10 sessions
• Interfaces:
• 1x 10/100baseT RJ-45 Ethernet Port (IEEE 802.3)
• 2x RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
• Power Supply:
• DC Input Voltage: +5 VDC at 2.0 A Max.
• Power Consumption: 5 Watts
• Switching Type (100-240v) Automatic
• Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
• Indicator Lights/LED: Phone1, Phone2, Internet, Power
• Dimensions: 3.98 x 3.98 x 1.10 inch/ 101 x 101 x 28 mm