Promise VTE610sS 3U 16 Bay Single Controller Serial Attached SCSI RAID Storage System

• Mfr Part Number: VTE610SS
• Features:
• Single RAID controllers with four SAS-wide host interface ports per controller
• 16 hot-swappable drive bays in a robust 3U chassis
• Supports Serial Attached SCSI (SAS) and SATA 3Gb/s drives simultaneously
• RAID Levels 0, 1, 1E, 5, 6 10, 50, 60
• One SAS-wide (x4) expansion port per controller supports upto four VTrak JBODs (80 bays total)
• Supports cascade of upto four fully populated E-Class RAIDs (320 bays total)
• Out-of-band Ethernet or RS-232 management using standards based protocols including pop-up messages, event logging, and email notification.
• E-Class 3U/16-Bay SAS Models: Single Controller Configuration, Upgradeable to redundant
• Drive Support: Upto 16x 3.5"" hard drives; Supports any mix of SAS and SATA II 3Gb/s drives simultaneously in the same system; Direct SATA LED support & staggered physical drive spin-up
• External I/O Ports(per controller): Four external SAS-wide (x4) host interface ports; One external 3Gb/s SAS-wide (x4) ports for JBOD expansion (up to 4 VTrak JBOD Systems)
• Data Cache: Shared 512MB predictive data cache (max. to 2GB - purchase through Promise); Automatic write cache de-staging; 72-hour battery backup
• Command Queue Depth: 512 commands per controller
• RAID Level: RAID 0, 1, 1E, 5, 6, 10, 50, 60 - Any combination of these RAID levels can exist at the same time; Configurable RAID stripe size- 64K, 128K, 256K, 512K and 1MB stripe size per disk; Background task priority tuning: adjustment of minimum I/O reserved for server use during all background tasks
• Hot spares: Multiple global or dedicated hot-spare drives with revert options
• Max LUNs per subsystem: 256 in any combination of RAID levels and array types
• Max LUNs per array: 32 logical drives (LUNs); Supports LUN carving by allowing an array to be divided into multiple logical drives; RAID level, stripe size, sector size and cache policy can be configured per LUN. Supports out of order logical drive deletion and re-creation
• Max LUNs per Target ID: Up to 256, depending on host side driver and operating system
• LUN Masking and Mapping: Supports multiple hosts and initiator lists
• Disk data formats: Supports Disk Data Format (DDF) for industry wide standardization and drive roaming between Promise RAID products
• Background Activities: Media Patrol; Background synchronizing; Foreground initialization; Rebuild; Redundancy Check; SMART condition pooling; OCE (Online Capacity Expansion); RLM (RAID Level Migration); Priority Control, Rate Control and watermarking per BGA in Disk and NVRAM
• SCSI Commands: Supports extended SCSI command set equivalent to SCSI/FC hard disk drives; Variable sector size (512Byte to 4kB) to break legacy limitations; 16Byte CDB support for 64-bit LBA addressing
• Voltage: 100-240 Vac Auto-Ranging
• Current (Maximum): 8 A @ 100 Vac; 4 A @ 240 Vac (current rating with two power cords)
• Power Supply: Dual 500W, 100-240 Vac auto-ranging, 50-60 Hz, dual hot swap and redundant with PFC, N+1 design
• Power Consumption: 108.38 Watts (under load w/o HDD), 523.91 Watts (under load with SAS HDD)
• Safety: CE, FCC ClassA, VCCI, cUL, TUV, CB, BSMI, C-Tick, MIC
• Dimensions (WxDxH): 17.6 x 22.1 x 5.2 in / 44.65 x 56.1 x 13.1 cm
• Weight(w/o drives): 67.2 lbs / 30.5 kg